Painting of interior surfaces
RELATED MATERIALS
- ISOMAT-CLASSIC – High-quality emulsion paint for interior use
- UNI-PRIMER – Acrylic, water-based primer
- DUROCRET – Polymer-modified cement mortar
- UNICRET – Mortar for rendering and masonry
- UNICRET-FAST – Fast-setting, white repairing mortar
- STUCCOCRET – Spatula putty
- ISOMASTIC-A – Elastoplastic acrylic sealant
I. NATURE OF THE PROBLEM – REQUIREMENTS
Painting walls requires paints that are durable, adhere well to the substrate and offer good coverage so that material consumption is economical. The final surface should be easy to clean.
II. SOLUTION
ISOMAT-COLOR is an ideal solution for painting plaster, concrete and gypsum boards. It is a white, water-based plastic paint based on copolymer PVA-VEOVA. It provides:
- Brilliant whiteness
- Excellent coverage
- Vapor permeability allowing the substrate to breathe
- Excellent bonding to the substrate
- Excellent washability
- Aesthetically pleasing finish
III. APPLICATION
Substrate preparation
1. The surface to be painted must be dry and free of grease, dust and loose particles.
2. Imperfections in the plaster should be repaired with DUROCRET polymer-modified mortar, UNICRET cement-lime mortar or UNICRET-FAST rapid mortar.
3. Apply STUCCOCRET spatula putty to smooth the surface.
4. Widen cracks and joints by about 1 cm and fill them with ISOMASTIC-A elastoplastic acrylic sealant.
5. Prime the surface with UNI-PRIMER acrylic primer (diluted with water if required). UNI-PRIMER stabilizes loose plaster. Consumption: 100–200 g/m² depending on surface absorbency.
6. Once the primer has dried, application of ISOMAT-COLOR can follow.
Application of ISOMAT-COLOR
- ISOMAT-COLOR may be used undiluted or diluted with 5–10 % water.
- Apply two coats by brush, roller or spray.
- The second coat should only be applied after the first coat is fully dry.
- Coverage: 8–10 m²/kg per coat.
RELATED MATERIALS
- ISOMAT-CLASSIC – High-quality emulsion paint for interior use
- UNI-PRIMER – Acrylic, water-based primer
- DUROCRET – Polymer-modified cement mortar
- UNICRET – Mortar for rendering and masonry
- UNICRET-FAST – Fast-setting, white repairing mortar
- STUCCOCRET – Spatula putty
- ISOMASTIC-A – Elastoplastic acrylic sealant
I. NATURE OF THE PROBLEM – REQUIREMENTS
Painting walls requires paints that are durable, adhere well to the substrate and offer good coverage so that material consumption is economical. The final surface should be easy to clean.
II. SOLUTION
ISOMAT-COLOR is an ideal solution for painting plaster, concrete and gypsum boards. It is a white, water-based plastic paint based on copolymer PVA-VEOVA. It provides:
- Brilliant whiteness
- Excellent coverage
- Vapor permeability allowing the substrate to breathe
- Excellent bonding to the substrate
- Excellent washability
- Aesthetically pleasing finish
III. APPLICATION
Substrate preparation
1. The surface to be painted must be dry and free of grease, dust and loose particles.
2. Imperfections in the plaster should be repaired with DUROCRET polymer-modified mortar, UNICRET cement-lime mortar or UNICRET-FAST rapid mortar.
3. Apply STUCCOCRET spatula putty to smooth the surface.
4. Widen cracks and joints by about 1 cm and fill them with ISOMASTIC-A elastoplastic acrylic sealant.
5. Prime the surface with UNI-PRIMER acrylic primer (diluted with water if required). UNI-PRIMER stabilizes loose plaster. Consumption: 100–200 g/m² depending on surface absorbency.
6. Once the primer has dried, application of ISOMAT-COLOR can follow.
Application of ISOMAT-COLOR
- ISOMAT-COLOR may be used undiluted or diluted with 5–10 % water.
- Apply two coats by brush, roller or spray.
- The second coat should only be applied after the first coat is fully dry.
- Coverage: 8–10 m²/kg per coat.
